Slime mold

Slime mold from Olympic National Park, USA (Possibly Physarum)

Fuligo septica, the "dog vomit" slime mold

Mycetozoa from Ernst Haeckel's 1904 Kunstformen der Natur (Artforms of Nature)

Slime mold is a broad term describing fungi-like organisms that use spores to reproduce. They were formerly classified as fungi, but are no longer considered part of this group.

Their common name refers to part of some of these organism's lifecycles where they can appear gelatinous (hence the name slime). However, this feature is mostly seen with the myxomycetes, which are the only macroscopic slime molds.

Slime molds have been found all over the world and feed on microorganisms that live in any type of dead plant material. For this reason, these organisms are usually found in soil, lawns, and on the forest floor, commonly on deciduous logs. However, in tropical areas they are also common on inflorescences, fruits and in aerial situations (e.g., in the canopy of trees). In urban areas, they are found on mulch or even in the leaf mold in gutters. One of the most commonly encountered slime molds, both in nature in forests in the temperate zones of the earth as well as in classrooms and laboratories is the yellow Physarum polycephalum.

Most slime mold are smaller than a few centimetres, but the largest recorded reached an area of up to thirty square metres, making them the largest undivided cells known (although one could argue that slime molds are made up from individual cells). Many have striking colours such as yellow, brown and white.

Taxonomy

Slime molds can generally be divided into two main groups.

• A plasmodial slime mold involves numerous individual cells attached to each other, forming one large membrane. This "supercell" is essentially a bag of cytoplasm containing thousands of individual nuclei.
• By contrast, cellular slime molds spend most of their lives as individual unicellular protists, but when a chemical signal is secreted, they assemble into a cluster that acts as one organism.

Slime molds as a group, are polyphyletic. They were originally represented by the subkingdom Gymnomycota in the Fungi kingdom and included the defunct phyla Myxomycota, Acrasiomycota and Labyrinthulomycota. Today, slime molds have been divided between several supergroups and not one of them is included in the kingdom Fungi.

In more strict terms, slime molds comprise the group of the mycetozoans (myxomycetes, dictyostelids and protostelids). However, even at this level there are conflicts to be resolved. Recent molecular evidence shows that the first two groups are likely to be monophytelic; however the protostelids seem to be polyphyletic, too. For this reason, scientists are trying to elucidate the relations between these three groups.

Bikont

• Acrasiomycota: slime molds which belong to the supergroup Excavata as the family Acrasidae. They have a similar life style to Dictyostelids.
• Labyrinthulomycota: slime nets which belong to the supergroup Chromalveolata as the class Labyrinthulomycetes.
• Plasmodiophorids: parasitic protists which belong to the supergroup Rhizaria. They can cause cabbage club root disease and powdery scab tuber disease.

The Acrasidae have a life style similar to Dictyostelids, but their amoebae behave differently and are of uncertain taxonomic position.

The Plasmodiophorids also form coenocytes but are internal parasites of plants (e.g., club root disease of cabbages).

Finally, the Labyrinthulomycetes are marine and form labyrinthine networks of tubes in which amoebae without pseudopods can travel.

Amoebozoa

• Mycetozoa, which includes the defunct phylum Myxomycota, belong to the supergroup Amoebozoa and include:
  • Myxogastria or myxomycetes and Protostelids: syncytial or plasmodial slime molds or protostelids.
  • Dictyosteliida: unicellular slime molds or dictyostelids.

A common slime mold which forms tiny brown tufts on rotting logs is Stemonitis. Another form which lives in rotting logs and is often used in research is Physarum polycephalum. In logs it has the appearance of a slimy webwork of yellow threads, up to a few feet in size. Fuligo forms yellow crusts in mulch.

The Protostelids life cycle is very similar to the above descriptions, but they are much smaller, the fruiting bodies only forming one to a few spores.

The Dictyosteliida, cellular slime molds, are distantly related to the plasmodial slime molds and have a very different life style. Their amoebae do not form huge coenocytes, and remain individual. They live in similar habitats and feed on microorganisms. When food runs out and they are ready to form sporangia, they do something radically different. They release signal molecules into their environment, by which they find each other and create swarms. These amoeba then join up into a tiny multicellular slug-like coordinated creature, which crawls to an open lit place and grows into a fruiting body. Some of the amoebae become spores to begin the next generation, but some of the amoebae sacrifice themselves to become a dead stalk, lifting the spores up into the air.

Life cycle

Slime mold growing out of bin of wet paper

They begin life as amoeba-like cells. These unicellular amoebae are commonly haploid and multiply if they encounter their favorite food, bacteria. These amoebae can mate if they encounter the correct mating type and form zygotes which then grow into plasmodia. These contain many nuclei without cell membranes between them, which can grow to be meters in size. One variety is often seen as a slimy yellow network in and on rotting logs. The amoebae and the plasmodia engulf microorganisms. The plasmodium grows into an interconnected network of protoplasmic strands.

Within each protoplasmic strand the cytoplasmic contents rapidly stream. If one strand is carefully watched for about 50 seconds the cytoplasm can be seen to slow, stop, and then reverse direction. The streaming protoplasm within a plasmodial strand can reach speeds of up to 1.35 mm per second which is the fastest rate recorded for any organism. Migration of the plasmodium is accomplished when more protoplasm streams to advancing areas and protoplasm is withdrawn from rear areas. When the food supply wanes, the plasmodium will migrate to the surface of its substrate and transform into rigid fruiting bodies. The fruiting bodies or sporangia are what we commonly see, they superficially look like fungi or molds but are not related to the true fungi. These sporangia will then release spores which hatch into amoebae to begin the life cycle again.

Slime Mold Plasmodia

In Myxomycetes, the plasmoidal portion of the life cycle only occurs after syngamy, which is the fusion of cytoplasm and nuclei of myxoamoebae or swarm cells. Therefore, all of the nuclei are diploid at this stage and mitosis occurs simultaneously throughout the organism. Myxomycete plasmodia are multinucleate masses of protoplasm that move by cytoplasmic streaming. In order for the plasmodium to move, cytoplasm must be diverted towards the leading edge from the lagging end. This process results in the plasmodium advancing in fan-like fronts. As it moves, plasmodium also gains nutrients through the phagocytosis of bacteria and small pieces of organic matter.

The Myxomycete plasmodium also has the ability to subdivide and establish separate plasmodia. Conversely, separate plasmodia that are genetically similar and compatible can fuse together to create a larger plasmodium. In the event that conditions become dry, the plasmodium will form a sclerotium, essentially a dry and dormant state. In the event that conditions become moist again the sclerotium absorbs water and an active plasmodium is restored. When the food supply wanes, the Myxomycete plasmodium will enter the next stage of its life cycle forming haploid spores, often in a well-defined sporangium or other spore-bearing structure.

Slime molds in culture

• Traditional Finnish lore describes how malicious witches used yellow Fuligo (there called "paranvoi," or butter of the familiar) to spoil milk.
• Mycologist Tom Volk reports that the plasmodium of Fuligo is eaten in Mexico. ^[1]
• the nethack generic fruit is called a slime mold by default.
• The popular webcomic GPF has as one of its main characters two sentient, talking slime molds by the names of Frederick Physarum and Persephone.

See also

• Swarming motility

External links

• Slime Molds
• Slime Mould Solves Maze Puzzle from abc.net.au
• Hunting Slime Molds from Smithsonian Magazine
• "Robot Piloted by a Slime Mold". Slashdot. 2006. Retrieved February 15. {{cite web}}: Check date values in: |accessdate= (help); Unknown parameter |accessyear= ignored (|access-date= suggested) (help)
• dictyBase is an online informatics resource for Dictyostelium, a cellular slime mould.
• Beautiful Slime MoldSlime Mold Macro Photography Shots
• nomen.eumycetozoa.com is an online nomenclatural information system of slime moulds (Myxomycetes, Dictyostelids and Protostelids) of the world.
• good photo gallery
• Slime Mold Photos Life cycle of Reticularia lycoperdon at MushrooMania.com.